Angel
Angel
The Angel is a memory control desk for 240 channels. Its memory is divided into 4 pages. On each page you can store: 88 scenes and 2 loops. So there is a memory capacity for 360 scenes (incl. 8 loops). There are 20 faders and 12 channelbank selection buttons to set the level of 240 channels.
The Angel can be used as a "scene maker" for the Toddler. The desk can also be used as a manual control desk. Do you still use some analogue dimmers? No problem: for channel 1 up and until 20 the output is also available as analogue signal.
Special effects
Remarkable is the possibility of editing scenes and scene fade times on the fly: fades and loops keep going while you change values. This feature is very helpful for creating a special effect Another highlight is the capability of the Angel to handle 11 auto fades simultaneously, for example while a scene is fading in, and 10 'submaster' fades and loops are going on, you can switch to blind channel control, and manual cross fade to a scene built instantaneously. Meanwhile all the 10 'submaster' fades and loops keep going on.
Features
- 240 channels, scene building with 20 faders
- memory capacity: 360 scenes (incl. 8 loops)
- 10 extra submasters / GO buttons
- 8 loops by defining a sequence of scenes in memory
- 11 auto fades (GO's) and 2 loops play simultaneously
- programmable fade times
- editing 'on the fly', live and blind
- memory pre-view, copy, delete and insert
- channel level indication by led and in percents on display
- soft patch of 240 steering channels to 240 DMX channels
- disable/enable flashing and soft patch
Specifications
- Mains: 220-230 [V], 50....60 [Hz]
- Outputs:
- DMX512,
- analogue for channel 1 up and until 20 (+10V or 370uA)
- RS232 gate, prepared for communication with the PC
- Dimensions: 475x178x60[mm], 3[kg]
Accessories
- Flightcase
- Software for communication with PC (not yet available)